Belkin F1DG102D User Manual

Package Contents
• Remote
• KVM Switch with Cables
• Audio Extension Cable
• 5V, 2.6A Power Adapter
Introduction
Congratulations and thank you for purchasing Flip. Flip is easy to
set up and use, and comes with everything you need to share one
monitor, keyboard, mouse, and one set of speakers between your two
computers. No additional cables or software are required.
The diagram below shows a typical Flip setup. The remote sits on your
desk and connects—along with your monitor, keyboard, mouse, and
speakers—to the KVM Switch. The Switch is connected to your two
computers using the included cables.
Package Contents/Introduction 1
System Requirements
Monitor
Flip DVI-D supports DVI monitors, including Apple Cinema Display
®
monitors, and supports both single-link and dual-link video modes.
Flip DVI-D does not support analog monitors or video cards (VGA).
DVI-D connection
Keyboard/Mouse
Flip fully supports a Mac or PC keyboard and mouse with a USB
®
connection, including all special-function keys.
USB connection
Computers
Flip DVI-D can be used with any Mac or PC desktop or notebook
computer that supports DVI monitors and USB keyboard and mouse
connections, and that runs on one of these operating systems:
• Mac OS X v10.3 and above
®
• Windows 2000, XP, 2003, Vista
® TM
• Linux *
®
*Switching can only be performed using the Flip button.
System Requirements 2
Installing your Flip
Before you begin, make sure that your USB keyboard and mouse work
properly with both computers, and that both computers are powered
on. However, the monitor must be powered off.
1. Connect your monitor, keyboard, mouse, and speakers to the
Switch. Then, connect the remote to the base. Place the remote
anywhere on your desk.
Installing your Flip 3
2. Connect the power adapter to the KVM Switch and plug it into a
power outlet.
Installing your Flip 4
3. Connect one set of cables to the monitor, USB, and speaker ports
on your first computer. Wait for your computer to recognize the
new USB device (Flip). Then connect the other set of cables to the
monitor, USB, and speaker ports on your second computer. If the
cable is not long enough to connect to your speaker port, use the
included audio extension cable.
4. Power on the monitor.
You are now ready to use your Flip.
Flip Tip:
Keep the KVM Switch behind your computers
Installing your Flip 5
to keep your desk free of cable clutter.