Advertisement
Contents
Package
• Wireless Remote
• Base with Cables
• Audio Extension Cable
• Fastener Strip
• Battery
Introduction
Congratulations and thank you for purchasing Switch2 Wireless.
Switch2 is easy to set up and use, and comes with everything you
need to share one monitor, keyboard, mouse, and one set of speakers
between your two computers. No additional cables or software are
required.The diagram below shows a typical Switch2 Wireless setup.
The wireless remote sits on your desk. Your monitor, keyboard, mouse,
and speakers plug into the base, and the base connects to your two
computers through the attached cables.
Package Contents/Introduction | 1
System Requirements
Monitor
Switch2 supports any monitor with a VGA connection. You can also
use your DVI-I monitor with Switch2 by connecting a VGA adapter to
the DVI cable. Switch2 does not support direct DVI connections from
monitors.
VGA connection
Keyboard/Mouse
Switch2 supports any keyboard and mouse with a USB connection.
USB connection
Computers
Switch2 can be used with any PC or Mac® desktop or notebook
computer that supports USB keyboard and mouse connections, and
that runs on one of these operating systems:
• Windows
98 SE, 2000, XP, 2003
®
• Mac OS
X v10.0 and above
®
• Linux
®
System Requirements | 2
Advertisement
