Toshiba C70 User Manual
Hide thumbs Also See for C70:
Table of Contents

Advertisement

User's Manual
C70/C70t/C70D/C75/C75t/
C75D/L70/L70t/L70D/L70Dt/
S70/S70t/S70D/S70Dt

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba C70

  • Page 1 User's Manual C70/C70t/C70D/C75/C75t/ C75D/L70/L70t/L70D/L70Dt/ S70/S70t/S70D/S70Dt...
  • Page 2: Table Of Contents

    Using the Touch Pad ................4-2 The Keyboard ..................4-3 Optical disc drives ................4-6 TOSHIBA VIDEO PLAYER ..............4-12 TOSHIBA Blu-ray Disc Player ............4-14 3D Playback on an External 3D Device ..........4-16 Battery ....................4-21 LAN ....................... 4-27 Additional memory module ..............
  • Page 3 Utilities and Applications ..............5-1 Special features ..................5-4 TOSHIBA Password Utility ..............5-6 TOSHIBA System Settings ..............5-9 USB Charge ..................5-10 TOSHIBA Media Player by sMedio TrueLink+ ........5-12 TOSHIBA PC Health Monitor .............. 5-14 System Recovery ................5-15 Chapter 6 Troubleshooting Problem solving process ..............
  • Page 4: Chapter 1 Toshiba Legal, Regulatory And Safety

    TOSHIBA computers. Copyright, Disclaimer and Trademarks Copyright © 2013 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
  • Page 5: Regulatory Information

    ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC.
  • Page 6: Fcc Conditions

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s External RGB monitor port, Universal Serial Bus (USB...
  • Page 7: Working Environment

    EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 9: Following Information Is Only For Turkey

    The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.
  • Page 10: Video Standard Notice

    Battery is a consumption product, since the battery time depends on the usage of your computer. If the battery cannot be charged at all, then it is a defect or failure. The changes in battery time is not a defect or failure.
  • Page 11 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL"...
  • Page 12 Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
  • Page 13: Energy Star Program

    ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer...
  • Page 14: Optical Disc Drive Safety Instructions

    To prevent direct exposure to the laser beam, do not try to open the enclosure. General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be User's Manual 1-11...
  • Page 15 observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual. Provide adequate ventilation Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode).
  • Page 16: Cleaning The Computer

    Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
  • Page 17: Safety Icons

    Make sure all disk/disc activity has ended before moving the computer. Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer. Close the display panel. Do not pick up the computer by its display panel. Before carrying your computer, shut it down, disconnect the AC adaptor and allow it to cool down - a failure to follow this instruction may result in minor heat injury.
  • Page 18 Please read. A note is a hint or advice that helps you make best use of your equipment. User's Manual 1-15...
  • Page 19: Chapter 2 Getting Started

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 20: Using Your Computer For The First Time

    Right-click Click the right Touch Pad control button once. Right-click the mouse once. Press and hold on the touch screen (only for touch screen models). Double-click Tap the Touch Pad or click the left Touch Pad control button twice. Left-click the mouse twice. Tap the touch screen twice (only for touch screen models).
  • Page 21: Connecting The Ac Adaptor

    DC power and reduces the voltage supplied to this computer. Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 22 When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in this User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched.
  • Page 23: Opening The Display

    Plug the power cord into a live wall outlet - the DC IN/Battery indicator should glow. Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.
  • Page 24: Turning On The Power

    When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel (Do not use excessive force when opening or closing the display panel). Turning on the power This section describes how to turn on the power - the Power indicator will then indicate the status.
  • Page 25: Getting To Know Windows

    Getting to know Windows For detailed information on what is new and how to operate Windows 8, please refer to the Windows Help and Support. Start screen The Start screen is the launching pad for everything you can do in the Windows operating system, providing new and easy ways to access everything from your favorite apps and Web sites to your contacts and other important information.
  • Page 26: Turning Off The Power

    Windows Store Although many applications will be pre-installed or built-in to your computer, you will also have the ability to download many other applications at the click of your mouse. In the Windows Store you can search for and browse thousands of apps, all grouped into easy to find categories.
  • Page 27: Sleep Mode

    Please note that keyboard keys can only be used if the Wake- up on Keyboard option is enabled within the TOSHIBA System Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.
  • Page 28: Hibernation Mode

    Benefits of Sleep Mode The Sleep Mode feature provides the following benefits: Restores the previous working environment more rapidly than the Hibernation Mode feature. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature.
  • Page 29: Starting Hibernation Mode

    Do not install or remove a memory module while the computer is in Hibernation Mode, as data will be lost. Do not switch to Hibernation Mode while transferring data to external media, such as USB devices, memory media or other external memory devices, as data will be lost.
  • Page 30 Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer will take a moment to save the current data in memory to the Hard Disk Drive. After you turn off the computer, and the content of memory has been saved to the Hard Disk Drive, turn off the power to any peripheral devices.
  • Page 31: Chapter 3 The Grand Tour

    Chapter 3 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section.
  • Page 32: Left Side

    Power indicator The Power indicator glows white when the computer is turned on. However, if you turn the computer off into Sleep Mode, this indicator will blink white. Wireless The Wireless communication indicator glows communication amber when the Bluetooth or Wireless LAN indicator functions are turned on.
  • Page 33: Right Side

    Universal Serial Bus One or two Universal Serial Bus ports, which (USB 2.0) port comply to the USB 2.0 standard, are provided on the left side of the computer. The USB 2.0 port is not compatible with USB 3.0 devices. Please note that it is not possible to confirm the operation of all functions of all USB devices that are available.
  • Page 34 Microphone jack A 3.5 mm mini microphone jack enables connection of a mini jack for monaural microphone input. The integrated sound system provides support for the computer's internal speakers and microphone, as well as allowing an external microphone and headphones to be connected via the appropriate jacks. Universal Serial Bus Two Universal Serial Bus ports, which comply to (USB 3.0) ports...
  • Page 35: Back

    Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer. Back The following figure shows the back of computer. Figure 3-4 The back of the computer 1.
  • Page 36: Front With The Display Open

    Battery lock Slide the battery lock to release the battery pack ready for removal. Battery release latch Slide and hold this latch into its "Unlock" position in order to release the battery pack for removal. For more detailed information on removing the battery pack please refer to the Battery section.
  • Page 37 Figure 3-6 The front of the computer with the display panel open 1. Wireless communication antennas 8. Keyboard (not shown)* 2. Microphone* 9. Stereo speakers 3. Web Camera LED* 10. Power button 4. Web Camera* 11. Touch Pad 5. Microphone* 12.
  • Page 38 Legal Footnote (Wireless LAN) For more information regarding Wireless LAN, please refer to the Legal Footnotes section. Microphone The built-in microphone allows you to import and record sounds for your application - please refer to the Sound System and Video mode section for more information.
  • Page 39: Internal Hardware Components

    This computer includes a battery pack inside. However, please do not attempt to dismount or replace it by yourself. Please contact an authorized TOSHIBA service provider, if necessary. The rechargeable lithium-ion battery pack provides power to the computer when the AC adaptor is not connected.
  • Page 40 The processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Health Monitor utility by clicking Desktop -> Desktop Assist (in taskbar) -> Support & Recovery -> PC Health Monitor, and then click PC Information.
  • Page 41 Video RAM The memory in a computer's graphics adaptor, used to store the image displayed on a bitmap display. The amount of Video RAM available is dependent on the computer's system memory. Desktop -> Desktop Assist (in taskbar) -> Control Panel -> Appearance and Personalization ->...
  • Page 42: Intel Display Power Saving Technology

    overrides will be used automatically each time the specified programs are launched. Please use the default setting for NVIDIA Optimus technology. If the program does not run normally after the setting has been changed, please restore the program to the default setting. If the program does not run normally, please restore the Preferred graphics processor to the default setting.
  • Page 43: Power Condition Descriptions

    ® In Intel HD Graphics Control Panel: Click Power and select On battery. Click Off under Display Power Saving Technology. Click Apply. If you want to enable this feature, under the conditions mentioned above, click On under Display Power Saving Technology. ®...
  • Page 44 Power on Power off (no operation) AC adaptor Battery fully • Operates • No charge connected charged • No charge • LED: white • LED: white Battery partially • Operates • Quick charge charged or no • Charge • LED: amber charge •...
  • Page 45: Power Indicator

    Power indicator Check the Power indicator to determine the power status of the computer - the following indicator conditions should be noted: White Indicates power is being supplied to the computer and the computer is turned on. Flashing white Indicates that the computer is in Sleep Mode and that there is sufficient power available (AC adaptor or battery) to maintain this condition.
  • Page 46: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that should be taken when using it. Using the Touch Screen Some models are equipped with a touch screen. You can use your finger to manipulate icons, buttons, menu items, the onscreen keyboard, and other items on the touch screen.
  • Page 47: Using The Touch Pad

    Swipe Quickly move your finger in from the edge of the screen, without pausing when you first touch it. Swipe from the left edge: shows your recently opened apps, and so on. Swipe from the right edge: opens or closes the charms (Search, Share, Start, Devices, Settings).
  • Page 48: The Keyboard

    Swipe Quickly move your finger in from the edge of the Touch Pad, without pausing when you first touch Swipe from the left edge: shows your recently opened apps. Swipe from the right edge: opens or closes the charms (Search, Share, Start, Devices, Settings). Swipe from the top edge: opens or closes the app command bar.
  • Page 49: Function Key

    CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format. NUM LOCK When the NUM LOCK indicator glows, you can use the number keys on the keyboard for number entry. Function Key The function keys (F1 ~ F12) are the twelve keys at the top of your keyboard.
  • Page 50: Windows Special Keys

    Some functions will show the toast notification at the edges of the screen. Those toast notifications are disabled at factory default. You can enable them in the TOSHIBA Function Key application. To access it, click Desktop -> Desktop Assist (in taskbar) -> Tools &...
  • Page 51: Optical Disc Drives

    Optical disc drives The computer may be installed with a DVD Super Multi drive, Blu-ray™ Combo drive or Blu-ray™ Writer drive (BDXL™). When the computer is accessing an optical disc, the indicator on the drive glows. Formats The drives support the following formats. DVD Super Multi drive The drive supports the following formats: CD-ROM, DVD-ROM, DVD- Video, CD-DA, CD-Text, Photo CD™...
  • Page 52 Grasp the disc tray gently and pull until it is fully opened. Figure 4-2 Pressing the eject button and pulling the disc tray open 1. Eject button 2. Disc tray Lay the disc, label side up, in the disc tray. Figure 4-3 Inserting a disc 1.
  • Page 53: Removing Discs

    Removing discs To remove the disc, follow the steps as detailed below: Do not press the eject button while the computer is accessing the optical disc drive. Wait for the optical disc drive indicator to go out before you open the disc tray.
  • Page 54: Important Message

    - this may cause you to either lose data or incur other damage to the drive or media. Disclaimer TOSHIBA does not assume responsibility for the following: User's Manual...
  • Page 55: Before Writing Or Rewriting

    Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd.
  • Page 56: When Writing Or Rewriting

    DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media) DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media) DVD-RAM: (DVD Super Multi drive only) DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2...
  • Page 57: Toshiba Video Player

    Keep mobile phones and other wireless communication devices away from the computer. TOSHIBA VIDEO PLAYER Please be aware of the following limitations when you use the TOSHIBA VIDEO PLAYER: Notes on use This software can only be used on Windows 8.
  • Page 58 Do not lock the computer using the Windows logo ( ) + L keys when running the TOSHIBA VIDEO PLAYER. The TOSHIBA VIDEO PLAYER does not have a parental control function. In order to protect copyrights, the Windows Print Screen function is disabled when TOSHIBA VIDEO PLAYER is running.
  • Page 59: Toshiba Blu-Ray Disc Player

    TOSHIBA VIDEO PLAYER features and instructions are explained in details in TOSHIBA VIDEO PLAYER Manual. Use the following procedure to open TOSHIBA VIDEO PLAYER Manual. Press the F1 key when TOSHIBA VIDEO PLAYER is launched and click the Help button. TOSHIBA Blu-ray Disc Player Please be aware of the following limitations when you use TOSHIBA Blu- ray Disc Player.
  • Page 60 When you purchase Blu-ray™ Video, make sure it matches your drive, otherwise it will not play properly. To playback video on an external display or TV using TOSHIBA Blu- ray Disc Player, use output devices like external displays or TV that have HDCP supported HDMI port.
  • Page 61: 3D Playback On An External 3D Device

    TOSHIBA Blu-ray Disc Player Manual. Use the following procedure to open TOSHIBA Blu-ray Disc Player Manual. Press the F1 key when TOSHIBA Blu-ray Disc Player is launched and click the Help button. 3D Playback on an External 3D Device 3D playback on an external 3D device feature is only provided with some models.
  • Page 62 2D home video and other 2D contents you created, in 3D according to your personal preferences. The TOSHIBA VIDEO PLAYER is set by default in the 2D format. By pressing the 2Dto3D conversion function button, you decide to activate the 2Dto3D conversion function and therefore decide to watch your 2D content in 3D.
  • Page 63 The protection of intellectual property rights is essential for TOSHIBA. In this respect, TOSHIBA underlines that the Player should not be used in a manner infringing such rights. It is your...
  • Page 64 The picture generated by 2Dto3D conversion function is not the same as a picture produced for 3D playback use. The 2Dto3D conversion function simply uses TOSHIBA's original algorithm to apply pseudo 3D effect to the 2D content. The Player is set by default in the 2D format. By pressing the 2Dto3D...
  • Page 65 Depending on the system environment, the player may automatically switch into 2D if you perform any of the following operations during 3D playback. Furthermore, you may experience some time lag when the switching occurs. - Opening windows or pop-ups such as [Right-Click Menu], [Settings Window], [File Select] or [Error Message].
  • Page 66: Battery

    Battery This section explains battery types, use, recharging methods and handling. Battery types The computer has different types of batteries. Battery pack When the AC adaptor is not connected, the computer's main power source is a removable lithium ion battery pack, also referred to in this manual as the main battery.
  • Page 67: Charging The Batteries

    TOSHIBA as replacements. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.
  • Page 68: Battery Charging Notice

    Battery type Power off Power on Battery pack About 3 hours max About 3~5 hours (24Wh, 3 cell) Battery pack About 3 hours max About 3~5 hours (48Wh, 6 cell) Battery pack About 4 hours max About 4~6 hours (66Wh, 6 cell high capacity) Please be aware that the charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you are...
  • Page 69: Maximizing Battery Operating Time

    Clicking the battery icon on the Taskbar Via the Battery Status in the Windows Mobility Center window You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. This is because the computer needs this time to check the battery's remaining capacity and then calculate the remaining operating time, based on this together with the current power consumption.
  • Page 70: Extending Battery Life

    Battery type Sleep Mode Shut Down Mode Battery pack About 2 days About 22 days (24Wh, 3 cell) Battery pack About 4 days About 43 days (48Wh, 6 cell) Battery pack About 5.5 days About 60 days (66Wh, 6 cell high capacity) Extending battery life To maximize the life of your battery packs:...
  • Page 71: Removing The Battery Pack

    This section explains how to remove and install the battery pack, and begins with the removal process which is detailed through the following steps. Do not remove the battery pack while the computer is in Sleep Mode. Data is stored in RAM, so if the computer loses power it could be lost. In Hibernation Mode, data will be lost if you remove the battery pack or disconnect the AC adaptor before the save is completed.
  • Page 72: Lan

    Installing the battery pack To install a battery pack, follow the steps as detailed below: Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries.
  • Page 73: Additional Memory Module

    Connecting the LAN cable To connect the LAN cable, follow the steps as detailed below: Connect the AC adaptor before connecting the LAN cable. The AC adaptor must remain connected during LAN use. If you disconnect the AC Adaptor while the computer is accessing a LAN, the system may hang up.
  • Page 74: Installing Memory Module

    Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions. a. The computer is turned on. b. The computer was shut down in either Sleep or Hibernation Mode. c. Wake-up on LAN is enabled.
  • Page 75 Slide your fingernail or a thin object under the cover and lift it off. Figure 4-8 Removing the memory module cover 1. Screw 2. Memory module cover Product appearance depends on the model you purchased. User's Manual 4-30...
  • Page 76 Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 30 degree angle before holding it down until the latches on either side snap into place. Figure 4-9 Seating the memory module 1.
  • Page 77: Removing Memory Module

    Seat the memory module cover in place and secure it with the screw. Take care to ensure that the memory module cover is firmly closed. Figure 4-10 Seating the memory module cover 1. Memory module cover 2. Screw Product appearance depends on the model you purchased. Install the battery pack - refer to Replacing the battery pack section, if...
  • Page 78: Memory Media

    Grasp the module by its edges and remove it from the computer. If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them.
  • Page 79 Please note that an adaptor is required to use miniSD/microSD Card. Please note that not all memory media have been tested and verified to work correctly. Therefore, it is not possible to guarantee that all memory media will operate properly. The slot does not support Magic Gate functions.
  • Page 80: Media Care

    Formatting a memory media card Memory media cards are sold already formatted in conformity to specific standards. If you reformat a memory card, be sure to reformat it with a device such as digital camera or digital audio player that uses the memory cards, not with the format command provided within Windows.
  • Page 81: Inserting Memory Media

    Inserting memory media The following instructions apply to all types of supported media devices. To insert memory media, follow the steps as detailed below: Turn the memory media so that the contacts (metal areas) face down. Insert the memory media into the memory media slot on the front of the computer.
  • Page 82: External Display

    Do not remove only the miniSD/microSD Card while leaving the adaptor in the memory media slot. External Display Your computer video capabilities can be enhanced with additional displays. External displays allows you to share your desktop or extend the desktop area.
  • Page 83 The HDMI out port HDMI (High-Definition Multimedia Interface) port digitally transfers both video and audio data without reducing the quality. HDMI-compatible external display devices including televisions can be connected via the HDMI port. To connect an HDMI-compatible display device, follow the steps as detailed below: As the port operation of all HDMI display devices have not been confirmed, some HDMI display devices may not function properly.
  • Page 84: Wireless Display

    3. To use the internal speakers on your computer, select Speakers. To use the television or the external monitor that you have connected to the computer, select a different playback device. 4. Click the Set Default button. 5. Click OK to close the Sound dialog. Settings for display video on HDMI To view video on the HDMI display device, be sure to configure the following settings otherwise you may find that nothing is displayed.
  • Page 85: Security Lock

    You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use. For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: User's Manual 4-40...
  • Page 86: Sound System And Video Mode

    DDR3/DDR3L-1600/1866 memory modules can easily be installed in the computer. The available option memory depends on TOSHIBA authorization. Universal AC Adaptor If you frequently use your computer at more than one site, it may be convenient to purchase an additional AC adaptor to be kept at each site in order to remove the need to always carry the adaptor with you.
  • Page 87: Video Mode

    DTS Studio Sound is provided with some models. It provides the following features: Advanced audio rendering to match 2D and 3D video content for enveloping surround sound Accurate placement of audio cues for immersive surround sound from any PC speaker configuration laptop/desktop speakers or headphones Broad sweet spot with elevated sound image Maximum volume output delivering maximum volume without creating clipping or distortion...
  • Page 88 If you are running some applications (for example a 3D application or video playback), you may see some disturbance, flickering or frame dropping on your screen. If that occurs, adjust the resolution of display, lowering it until the screen is displayed properly.
  • Page 89: Chapter 5 Utilities And Advanced Usage

    Assist (in taskbar). Furthermore, some utilities can also be launched from Start screen and desktop shortcut. TOSHIBA Desktop TOSHIBA Desktop Assist is a graphical user Assist interface that provides access to specific tools and TOSHIBA utilities and applications that make the use and configuration of the computer easier.
  • Page 90 To access this utility, click Desktop -> Desktop Assist (in taskbar) -> Tools & Utilities -> System Settings. TOSHIBA HDD TOSHIBA HDD Accelerator is a utility that can Accelerator improve hard drive access performance by using part of the main memory of the computer as a cache.
  • Page 91 To access this utility, click Desktop -> Desktop Assist (in taskbar) -> Tools & Utilities -> eco Utility. For details on TOSHIBA eco utility, see the help file. TOSHIBA Blu-ray This software is provided for playback of Blu-ray Disc Player Disc™.
  • Page 92: Special Features

    You may not have all the software listed above depending on the model you purchased. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 93 To access the Power Options, click Desktop -> Desktop Assist (in taskbar) -> Control Panel -> System and Security -> Power Options. Display automatic This feature automatically cuts off power to the computer's display panel when there is no power off keyboard input for a specified time, with power being restored the next time a key is pressed.
  • Page 94: Toshiba Password Utility

    In this instance all unsaved data in memory will be lost. TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. User's Manual...
  • Page 95: User Password

    Passwords set by the TOSHIBA Password Utility function are different from the Windows password. User Password To start the utility, click the following items: Desktop -> Desktop Assist (in taskbar) -> Tools & Utilities -> Password Utility -> User Password User authentication may be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords, etc.
  • Page 96: Supervisor Password

    To end the BIOS Setup, press F10, and then press ENTER to accept the changes. The computer will restart. If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE.
  • Page 97: Toshiba System Settings

    To run TOSHIBA System Settings, click Desktop -> Desktop Assist (in taskbar) -> Tools & Utilities -> System Settings. The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured. In addition there are also three buttons: OK, Cancel and Apply.
  • Page 98: Usb Charge

    LAN—Allows you to set conditions for LAN The settings or options explained here may vary depending on the model you purchased. After you changed the settings, a dialog box may appear to prompt you that the changes will take effect after the computer is restarted. Make sure to restart your computer immediately to apply these changes.
  • Page 99 If Sleep and Charge function is enabled, the computer’s battery will discharge during hibernation or when the computer is turned off. It is recommended that you connect the AC adaptor to the computer while using Sleep and Charge function. External devices connected to the USB bus power (DC5V) function that interfaces with the power ON/OFF of the computer may always be in an operational state.
  • Page 100: Toshiba Media Player By Smedio Truelink

    USB port without "USB Sleep and Charge function" or disable both “System ON CDP Charge Mode” and “USB Sleep and Charge function”. TOSHIBA Media Player by sMedio TrueLink+ Please be aware of the following limitations when you use the TOSHIBA Media Player by sMedio TrueLink+: User's Manual 5-12...
  • Page 101: Notes On Use

    Operating TOSHIBA Media Player by sMedio TrueLink+ The steps for playing a video file on a local library: Click My Local Library on the Start Page of TOSHIBA Media Player. Click a video file to playback. The steps for playing a music file on a local library: Click My Local Library on the Start Page of TOSHIBA Media Player.
  • Page 102: Toshiba Pc Health Monitor

    TOSHIBA Media Player Manual. Use the following procedure to open TOSHIBA Media Player Manual: Click the Tutorials icon on the Start Page of TOSHIBA Media Player. Use the following procedure to open TOSHIBA Media Player Online help: When TOSHIBA Media Player is running, click Help of the Settings Charm.
  • Page 103: System Recovery

    TOSHIBA's obligations under its standard limited warranty in any way. TOSHIBA's standard limited warranty terms and limitations apply. Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be started by clicking Desktop -> Desktop Assist (in taskbar) -> Support & Recovery -> PC Health Monitor.
  • Page 104 Operate the computer at full power. Do not use power-saving features. Do not write to the media when the virus check software is running. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background. Do not use utilities, including those intended to enhance Hard Disk Drive access speed.
  • Page 105 When there is no recovery partition, the Recovery Media Creator cannot make Recovery Media. However, if you have already created a "Recovery Media", you can use it to restore the recovery partition. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. User's Manual 5-17...
  • Page 106: Ordering Recovery Discs From Toshiba

    Follow the on screen instructions to finish the recovery. Ordering Recovery Discs from TOSHIBA* You can order Product Recovery discs for your notebook from the TOSHIBA Europe Backup Media Online Shop. * Please note that this service is not free-of-charge. Visit https://backupmedia.toshiba.eu on the Internet.
  • Page 107: Troubleshooting

    In reality many problems can be solved simply, but a few may require help from TOSHIBA Support - if you find you need to consult others, be prepared to describe the problem in as much detail as possible.
  • Page 108: Analyzing The Problem

    Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made will help to identify the problem faster.
  • Page 109: If Something Goes Wrong

    Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.
  • Page 110: Hardware And System Checklist

    If the indicator is glowing, the computer is on. Also, try turning the computer off and then on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the DC IN/Battery indicator. If the indicator is glowing, the computer is connected to a live external power source.
  • Page 111: Overheating Power Down

    If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN/Battery indicator.
  • Page 112: Real Time Clock

    Please refer to your software's documentation to garbled ensure that it is not remapping the keyboard in any way (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact TOSHIBA Support. User's Manual...
  • Page 113: Hard Disk Drive

    - if so remove it and try to start the Drive computer again. If this has no effect, check the Boot Priority Options setting within the TOSHIBA System Settings. Slow performance The files on the Hard Disk Drive may be...
  • Page 114: Pointing Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse.
  • Page 115 Touch Pad is either To access it, click Desktop -> Desktop Assist (in too sensitive or not taskbar) -> Control Panel -> Hardware and sensitive enough. Sound -> Mouse. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual...
  • Page 116: Usb Mouse

    If you are still unable to resolve the problem, contact TOSHIBA Support. USB device In addition to the information in this section, please also refer to the documentation supplied with your USB device.
  • Page 117 Sleep and Charge Enable the Sleep and Charge function in the function. TOSHIBA System Settings. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons.
  • Page 118: Sound System

    - please refer to Sound System and Video mode for further information. Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual 6-12...
  • Page 119: External Monitor

    Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.
  • Page 120: Toshiba Support

    TOSHIBA Support. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.
  • Page 121 - they are your best resource for current information and support. TOSHIBA technical support If you are still unable to solve the problem and suspect that it is hardware related, read the enclosed warranty booklet or visit www.toshiba- europe.com on the Internet. User's Manual 6-15...
  • Page 122: Appendix Specifications

    Chapter 7 Appendix Specifications This section summarizes the computer’s technical specifications. Physical Dimensions Physical Dimensions shown below do not include parts that extend beyond the main body. The physical dimensions may vary depending on the model you purchased. Size Approximately 413.0 (w) x 268 (d) x 31.31~33.70 (h) millimeters Approximately 413.0 (w) x 268 (d) x 30.66~33.05 (h) millimeters...
  • Page 123: Ac Power Cord And Connectors

    Computer 19V DC External RGB monitor port pin assignment Signal Name Description Red Video Signal Green Video Signal Blue Video Signal Reserved Reserved Ground Ground Ground Ground Power Supply Ground Reserved Reserved Data Signal HSYNC Horizontal Sync Signal VSYNC Vertical Sync Signal Data Clock Signal I/O (I): Input to computer I/O (O): Output from computer...
  • Page 124: Certification Agencies

    Current rating: Minimum 2.5 amperes Certification agencies China: U.S. and Canada: UL listed and CSA certified No. 18 AWG, Type SVT or SPT-2 Australia: Japan: DENANHO Europe: Austria: Italy: Belgium: CEBEC The Netherlands: KEMA Denmark: DEMKO Norway: NEMKO Finland: FIMKO Sweden: SEMKO France:...
  • Page 125: Information For Wireless Devices

    Australia Europe AS approved Approved by the appropriate agency Canada China CSA approved CCC approved Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n or b/g/ n), as defined and approved by the Institute of Electrical and...
  • Page 126: Wireless Devices And Your Health

    Please visit http://www.pc.support.global.toshiba.com, if you have any questions about using Wireless LAN or Bluetooth Card from TOSHIBA. In Europe visit http://www.toshiba-europe.com/computers/tnt/bluetooth.htm Wireless Devices and your health Wireless products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless products however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
  • Page 127: Card Specifications

    TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications...
  • Page 128: Bluetooth Wireless Technology

    The range of the wireless signal is related to the transmit rate of the wireless communication. Communications at lower transmit range may travel larger distances. The range of your wireless devices can be affected when the antennas are placed near metal surfaces and solid high-density materials.
  • Page 129 Europe Restrictions for Use of 2400.0-2483.5MHz Frequencies in Europe France: Outdoor use Military Radiolocation limited to 10mW use.Refarming of the 2.4GHz band e.i.r.p. within the has been ongoing in recent years to band allow current relaxed regulation Full 2454-2483.5MHz implementation planned 2012. Italy: For private use, a general authorization is required if WAS/...
  • Page 130 Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight.
  • Page 131 check the current channel of operation. If operation is occurring outside of the allowable frequencies for outdoor use, as listed above, the user must contact the applicable national spectrum regulator to request a license for outdoor operation. Canada - Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
  • Page 132 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.
  • Page 133: Device Authorization

    2.4 : This equipment uses a frequency of 2.4GHz. DS : This equipment uses DS-SS modulation. OF : This equipment uses OFDM modulation. 4 : The interference range of this equipment is less than 40m. : This equipment uses a frequency bandwidth from 2,400MHz to 2,483.5MHz.
  • Page 134: Radio Approvals For Wireless Devices

    This equipment is approved to the radio standard by the countries/regions in the following table. If you use this equipment in the countries/regions which are not listed in the table blow, please contact TOSHIBA Support. As of March 2013 Austria...
  • Page 135: Legal Footnotes

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.
  • Page 136: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
  • Page 137: Copy Protection

    Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. Screen will dim when the computer is operated on battery power and you may not be able to increase the brightness of the screen.
  • Page 138: Index

    Index hinges 3-8 opening 2-5 screen 3-8 AC adaptor additional 4-41 Display controller 3-11 connecting 2-3 DC IN 19V jack 3-2 Documentation list 2-1 Dual Pointing Device ASCII characters 4-5 Touch Pad 6-9 DVD Super Multi drive using Battery writing extending life 4-25 monitoring capacity 4-23 real time clock 3-10, 4-21...
  • Page 139 6-5 inserting 4-36 Power 6-4 removing 4-36 Real Time Clock 6-6 Sound system 6-12 TOSHIBA support 6-14 Memory media slot 4-33 Touch Pad 6-9 USB device 6-10 Moving the computer 1-13 USB mouse 6-10 MultiMediaCard removing 4-36...
  • Page 140 2-9 System automatic 5-5 Sound system problems 6-12 TOSHIBA Desktop Assist 5-1 USB device problems 6-10 Video mode 4-42 Video RAM 3-11 Web Camera 3-8 Wireless communication 7-5 User's Manual Index-3...

Table of Contents