Option
Reject
Loudspeaker
Handset
Touch tones
Swap
Press Swap to switch between the active call and the call on hold, Transfer
to connect a call on hold, and
• SET UP YOUR PHONE
Use the Optional headset
The HDB-4 may be purchased with your phone or separately as an accessory.
Connect the headset
1 Plug the headset jack into the
TM
Pop-Port
end of your phone.
2 Position the headset on your ear
as it appears in the illustration to
the right.
With the headset connected, you
can make, answer, and end calls
as usual.
•
Use the keypad to enter numbers
t
•
Press
to place a call
e
•
Press
to end a call
Function
Reject a call; the calling party receives a busy signal
Enable the handsfree feature in your phone
Disable handsfree and return to normal use (earpiece)
Send touch tones generated by your phones keypad
Switch between the active call and the call on hold
e
connector at the bottom
[ 29 ]
to disconnect yourself from all calls.
Basic operations