Installation; Attaching The Stand - Samsung C27F591FD User Manual

Installation

Attaching the Stand

― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
2
3
Place the protective Styrofoam (cushion) included in the
package on the floor and place the product facing down on
the Styrofoam, as shown in the image.
― Make sure to use the styrofoam (cushion) that came with the
monitor.
While holding the monitor, push in the stand neck in the
direction of the arrow, as shown in the image.
While holding the monitor, lift the stand neck in the direction
of the arrow and adjust it, as shown in the image.
4
Attach the stand base to the stand neck, and then fasten the
two screws on the base to tightly fix it.
- Caution
Do not hold the product upside down only by the stand.
- Caution
Do not press down on the monitor. There is a risk of damaging
the monitor.
16