Nokia 6800 User Manual page 131

Note: Your phone must be switched on to use this function. Do not switch the
phone on when wireless phone use is prohibited or when it may cause
interference or danger.
Sending and receiving data via IR
• Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices. The
preferable distance between the two devices in an infrared connection should
be one meter at most.
• To activate the IR port of your phone to receive data via IR, press
select Connectivity
• The user of the sending phone selects the desired IR function to start data
transfer.
If the data transfer is not started within two minutes after the activation of the IR
port, the connection is cancelled and has to be started again.
IR connection indicator
• When is shown continuously, the IR connection is activated and your
phone is ready to send or receive data via its IR port.
• When blinks, your phone is trying to connect to the other device or a
connection has been lost.
Note that the IR connection deactivates automatically.
Copyright
and Infrared.
‹
2003 Nokia. All rights reserved.
Menu and
131