Installation Procedure - LG UB85 series Owner's Manual

NOTE
yImage shown may differ from your TV.
yYour TV's OSD (On Screen Display) may differ slightly from that shown in
this manual.
yThe available menus and options may differ from the input source or
product model that you are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power
consumption. And the TV should be turned off if it will not be watched for
some time, as this will reduce energy consumption.
yThe energy consumed during use can be significantly reduced if the level
of brightness of the picture is reduced, and this will reduce the overall
running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is
made.
* If the TV is turned on for the first time after it was shipped from the factory,
initialization of the TV may take a few minutes.
INSTALLATION PROCEDURE
17