TP-Link TD-8817 User Manual page 45


Vlan ID Range: Enter the Vlan range, then the rule will be effective to the selected
Vlans.

IPP/DS Field: Select the type of the action to assign the priority.
When you select IPP/TOS, you can assign the priority via IP information. IP QoS function
is intended to deliver guaranteed as well as differentiated Internet services by giving
network resource and usage control to the Network operator.

IP Precedence Range: Enter the IP precedence range that the Router takes to
differentiate the traffic.

Type of Service: Select the type of service that the Router takes to deal with the traffic.

DSCP Range: Enter the DSCP range to differentiate the traffic.
When you select DSCP, you can assign the priority via DHCP (the header of IP group). It
maps the IP group into corresponding service class.

802.1p: Select the priority range for the rule.
Action: Configure the action that the Router takes to deal with the traffic which accord with

the rule.

IPP/DS Field: Select the type for the action.

IP Precedence Remarking: Select the number to remark the priority for IP precedence.

Type of Service Remarking: Select the type to remark the service.

DSCP Remarking: Enter the number to remark the DSCP priority.

802.1p Remarking: Select the type to remark the 802.1p priority.

Queue #: Select the priority type for the action.
There are two IP versions: IPv4 and IPv6. If you select IPv6 as IP version, please follow the
configuration below to configure the QoS information (shown in Figure 4-29).
QoS: Select this option to Activate/Deactivate the IP QoS on different types.

 Summary: Click the button to view the configurations of QoS.
 Rule: Configure the rules for QoS. If the traffic complies with the rule, then the Router will
take the corresponding action to deal with it.

Rule Index: Select the index for the rule you want to configure.
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
Figure 4-29
38