Power Indicator; Using Power Management; Selecting A Video Source; Picture Size - Mitsubishi Electric ldt322v User Manual

Power Indicator

Power ON
Power OFF
Power Standby when
"SCHEDULE" is enable
Power Standby
Diagnosis
(Detecting failure)

Using Power Management

The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fi xed period.
The power management feature on your new display has
been set to the "ON" mode. This allows your display to enter
a Power Saving Mode when no signal is applied. This could
potentially increase the life and decrease the power
consumption of the display.

Selecting a video source

To view a video source:
Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set [AUTO], [NTSC],
[PAL], [SECAM], [PAL60], [4.43NTSC], according to your
video format.

Picture Size

RGB 1, 2, 3 FULL
DVD/HD, VIDEO FULL
Signal Type
NORMAL SIZE
4:3
Squeeze
Status
Green
Red
Red On
Green Blinking
Red, Green
Red Blinking
* See troubleshooting on
page 35
NORMAL CUSTOM
REAL
NORMAL DYNAMIC
REAL CUSTOM
Recommended Size
NORMAL
DYNAMIC
FULL
NORMAL: Display by the inputed signal aspect ratio by PC
signal, or display in 4:3 aspect ratio at DVD/HD or VIDEO
signal.
FULL: Display in entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with
non-linearity. (Some round image will be cut by expansion.)
CUSTOM (ZOOM): Image can be expanded beyond the
active display area. The image which is outside of active dis-
play area is not displayed.
REAL: Image will be displayed 1 by 1 pixel.
ZOOM

Picture Mode

RGB 1, 2, 3 HIGHBRIGHT
DVD/HD,
HIGHBRIGHT
VIDEO

Audio Source Switching

You can switch the audio source using the AUDIO INPUT but-
ton.
AUDIO2
AUDIO1
English-20
ZOOM
sRGB
STANDARD
STANDARD CINEMA
AUDIO3