Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 14 3000 Series Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the I/O board under the tab on the computer base and align the
screw hole on the I/O board with the screw hole on the computer base.
2 Replace the screw that secures the I/O board to the computer base.
3 Slide the I/O-board cable into the I/O board and close the latch to secure
the cable.

Post-requisites

1 Follow the procedure from step 4 to step 11 in
2 Replace the keyboard.
3 Follow the procedure from step 4 to step 6 in
4 Replace the base
5 Replace the battery.
computer. After working inside your
cover.
After working inside your
"Replacing the palm
"Replacing the hard
rest".
drive".
51