Pin Code - Nokia 6340i User Manual

PIN code

The PIN code protects the SIM card from unauthorized access. The PIN code
can be 4–8 digits in length. After three successive incorrect entries the
PIN code is blocked and you are asked to enter the personal unblocking
key (PUK) code.
Note: The PIN code must be obtained from your wireless provider.
The PIN code is typically provided with your SIM card.
ENABLE PIN CODE REQUEST
You can enable your phone to request the PIN code upon power-up.
This provides extra security in case your phone is lost or stolen.
1 From the menus, select Settings > Security settings > PIN code request.
After a brief pause, you are prompted to enter the current PIN code.
2 Enter the PIN code and select OK.
3 Scroll to On and select OK.
A message appears in the display confirming your selection.
CHANGE YOUR PIN CODE
Before you can change your PIN code, you must enable PIN code request.
See "Enable PIN code request" on page 74.
1 From the menus, select Settings > Security settings > Access
codes > Change PIN code.
After a brief pause, you are prompted to enter the current PIN code.
2 Enter the PIN code and select OK.
You are prompted to enter the new PIN code.
3 Enter the new PIN code and select OK.
You are prompted to reenter the new PIN code for verification.
4 Enter the new PIN code again and select OK.
A message appears confirming your PIN code has been changed.
[ 74 ]