Table of Contents
Advertisement
Product Safety Guide
To use the machine safely
WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock.
In addition, you could create an electrical short, which may create the risk of a fire.
There are high-voltage electrodes inside the machine. Before you access the inside of
the machine, including for routine maintenance such as cleaning, make sure you have
unplugged the power cord from the AC power outlet, as well as unplugged any
Ethernet (RJ-45) (ADS-2500We only) cables from the machine.
DO NOT push objects of any kind into the machine through slots or openings in the
casing, as they may touch dangerous voltage points or short out parts.
DO NOT continue using the machine if it has been dropped or the cabinet has been
damaged. Instead, unplug the machine from the power outlet and contact Brother
Authorized Service Personnel.
The machine should be connected to an AC power source within the range indicated
on the rating label. DO NOT connect it to a DC power source or inverter. Doing this
might cause an electrical shock. If you are not sure what kind of power source you
have, contact a qualified electrician.
If water, other liquids, or metal objects get inside the machine, immediately unplug the
machine from the AC power outlet and contact Brother Authorized Service Personnel.
Power Cord Safety:
• Use only the power cord supplied with this product.
• DO NOT allow anything to rest on the power cord.
• DO NOT place the machine where people can walk on the cord.
• DO NOT place the machine in a position where the cord is stretched or strain is
otherwise put on the cord, as it may become worn or frayed.
5
Advertisement
Table of Contents
