Brake Pad Wear Limit Indicators - Toyota corolla 2004 Owner's Manual

"ABS" warning light
The light comes on when the ignition key
is turned to the "ON" position. If the anti−
lock brake system works properly, the
light turns off after a few seconds. There-
after, if the system malfunctions, the light
comes on again.
When the "ABS" warning light is on (and
the brake system warning light is off), the
anti−lock brake system does not operate,
but the brake system still operates con-
ventionally.
When the "ABS" warning light is on (and
the brake system warning light is off), the
anti−lock brake system does not operate
so that the wheels could lock up during
a sudden braking or braking on slippery
road surfaces.
If either of the following conditions
occurs, this indicates a malfunction
somewhere in the components moni-
tored by the warning light system. Con-
tact your Toyota dealer as soon as
possible to service the vehicle.
D
The light does not come on when the
ignition key is turned to the "ON" posi-
tion, or remains on.
D
The light comes on while you are driv-
ing.
154
'04 Corolla_U (L/O 0306)
A warning light turning on briefly during
operation does not indicate a problem.
CAUTION
If the "ABS" warning light remains on
together with the brake system warn-
ing light, immediately stop your ve-
hicle at a safe place and contact your
Toyota dealer.
In this case, not only the anti−lock
brake system will fail but also the
vehicle will become extremely unsta-
ble during braking.
Brake pad wear limit
indicators
The brake pad wear limit indicators on
your disc brakes give a warning noise
when the brake pads are worn to where
replacement is required.
If you hear a squealing or scraping noise
while driving, have the brake
checked and replaced by your Toyota
dealer as soon as possible. Expensive ro-
tor damage can result if the pads are not
replaced when necessary.
2004 COROLLA from Oct. '03 Prod. (OM12859U)
pads