Table of Contents
Advertisement
Connecting Your Monitor
WARNING: Before you perform any of the procedures in this section, follow the
Safety
Instructions.
NOTE: The monitor is equipped with an antenna of the radio transmitter, so we
recommend that you keep a safe distance of 20 cm at least between the monitor
and you.
NOTE: Route the cables through the cable-management slot before connecting
them.
NOTE: Do not connect all cables to the computer at the same time.
To connect your monitor to the computer:
1
Turn Off your computer and disconnect the power cable.
2
Connect the DC out cable of the wireless charging base to the power adapter port
on the monitor.
3
Connect the HDMI cable from your monitor to the computer.
4
Connect the power cable with 19.5V DC adapter (supplied with the monitor) to the
power adapter port on the wireless charging base.
5
Connect the power cables for your computer and monitor into nearby outlets.
6
Turn On the monitor and the computer.
Connecting the HDMI cable
CAUTION: The graphics are used for the purpose of illustration only. Appearance
of the computer may vary.
Setting Up the Monitor
21
|
Hide quick links:
Advertisement
Table of Contents
