Quick Installation - Dell D3216H User Manual

Quick Installation

1. Connect Video cable
Make sure both monitor and computer are powered OFF. Connect the video
cable (DVI cable) to the computer, then to the monitor.
or connect VGA cable (optional)
Connect the VGA cable from VGA output of computer to the VGA input of
the monitor.
2. Connect Power cord
Connect the power cord to a properly grounded AC outlet, then to the
monitor.
3. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
4. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)
Example: 1920 x 1080 @ 60 Hz
• For Windows® 7:
Right-click on the desktop > Screen Resolution > Resolution. Set the
resolution.
• For Windows® 8 or Windows® 8.1:
Select the desktop tile to switch to classic desktop. Right-click on the
desktop > Screen Resolution > Resolution. Set the resolution.
• For Windows® 10:
Right-click on the desktop > Display settings > Advanced display settings >
Resolution. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card's user guide for
instructions.
Example:
6 First Setup
Power cable
PC
VGA cable
DVI cable