Activate A Voice Command - Nokia 6255i User Manual

Activate a voice command

After you have associated a voice tag with a phone function, you can issue a
command by speaking the voice tag.
1. Press and hold Names.
2. When Please speak now
the microphone.
When the phone finds the voice tag,
recognized voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can choose one of the
following options:
• Select Playback
• Select Change
• Select Delete to erase the voice command tag.
Voice recorder
This feature allows you to record pieces of speech or sound with your phone and
listen to them later. The total available time is 30 seconds if no memos have been
stored. The maximum length of a recording depends on how much memory remains
available.
Record speech or sound
1. At the start screen, select
2. After the recorder start tone is heard, begin recording speech or sound.
3. When you are finished recording, press Stop.
4. Enter the title you wish to assign to the recording, and press OK.
Options
After you have saved the recording to the
and choose one of the following options:
• Select Playback
• Select Delete to erase the recording.
• Select Edit title
• Select Add alarm
appears, pronounce the voice tag clearly into
Found:
to listen to the voice command tag.
to change the voice command.
Menu >
to listen to the recording using the earpiece.
to rename the recording.
to add an alarm to the recording.
appears, and the phone plays the
Media > Voice recorder
Recordings list, highlight the recording,
70
> Record.
Copyright © 2004 Nokia