Polaris PTV 6x6 SERIES 10 Owner's Manual page 49

Pre-Ride Inspection
If a proper inspection is not performed before each use of the
vehicle, severe injury or death could result. Inspect the vehicle
before each use to ensure it's in proper working condition.
Use the following checklist to verify that your vehicle is in proper
working condition before each use.
Item/Inspection Procedure
1. Tires - check condition and pressures.
2. Fuel and oil tanks - fill both tanks to their proper levels.
3. All brakes - check operation, adjustment and fluid level (includes
auxiliary brake).
4. Throttle - check for free operation and closing.
5. Headlight/Taillight/Brakelight - check operation of all indicator
lights and switches.
6. Engine stop switch - check for proper function.
7. Wheels - check for tightness of wheel nuts and axle nuts; check
that axle nuts are secured by cotter pins.
8. Drive chain - check condition and slack; refer to drive chain
adjustment procedure.
9. Air cleaner element - check for dirt; clean or replace.
10. Steering - check for free operation, noting any unusual looseness in
any area.
11. Loose parts - visually inspect vehicle for any damaged components
or loose nuts, bolts or fasteners.
12. Riding gear - wear a helmet, goggles and protective clothing.
13. Engine coolant - check for proper level at the recovery bottle.
14. Dump bed latch - check condition and operation of the mechanism.
WARNING
OPERATION
47