Polaris PTV 6x6 SERIES 10 Owner's Manual page 40

CONTROLS
Electrical Switches and Indicators
With the engine running, verify the function of all indicator lights
before every use of the vehicle.
1
2
6
1 Light Switch/Hi-Lo Beam Control
The lights won't turn on unless both the main switch and the engine
stop switch are on.
2 Headlight Hi Beam Indicator (blue)
3 Transmission Reverse Indicator (yellow)
4 Transmission Neutral Indicator (green)
5 All Wheel Drive Indicator (red)
6 Engine High Temp Warning Indicator (red)
The high temp indicator will light only if the engine overheats.
Operating the vehicle on streets or roads, especially in darkness,
could result in an accident and serious injury or death.
Your PTV 6x6 is not equipped with highway-approved lights. It's
designed for and must be used for off-road use only. Use caution
and drive at reduced speeds in conditions of reduced visibility such
as fog, rain and darkness.
38
WARNING
5
3
4