Turning On The Power - Hitachi CP-WU8700 User Manual

Turning on the power

1.
Make sure that the power cord is firmly and correctly connected to the
projector and the outlet.
2.
Make sure that the POWER indicator is
lighted in steady orange. Then remove
the lens cover.
3.
Press the STANDBY/ON button on the
projector or the ON button on the remote
control.
The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in steady
green.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings, since the projection ray may cause a trouble on
your eyes.
►Blocking the beam by something causes high temperature and could result in
fire or smoke.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the
projector automatically turn on. For more information, please see User's
Manual - Operating Guide.
POWER indicator
ON button
STANDBY/ON button
13