The Back Panel - TP-Link TX-6610 User Manual

LAN

1.3.2 The Back Panel

ON/OFF: The switch for the power.

POWER: The Power plug is where you will connect the power adapter.

RESET: There are two ways to reset the Terminal's factory defaults.

Method one: With the Terminal powered on, use a pin to press and hold the Reset button for
at least 5 seconds. And the Terminal will reboot to its factory default settings.
Method two: Restore the default setting from Management  Factory Defaults of the
Terminal's Web-based utility.
GPON: The GPON is where you will connect the fiber.

LAN: Through the port, you can connect the Terminal to your PC or the other Ethernet

network devices.
TX-6610
On
A device is connected to the LAN port.
Flashing
The LAN port is transmitting or receiving data.
Off
No device is connected to the LAN port.
Figure 1-2
1-Port Gigabit GPON Terminal User Guide
3