Table of Contents
Advertisement
15 minutes, at which time it will display No service if
none is found. The phone will periodically continue to
search for service.
Note: The phone will not work in analog mode while
searching for digital service.
Checking signal strength
When at the start screen (see page 10) or in a
call, the strength of the radio signal is indicated
by the signal indicators on the left side of your
phone's display. These indicators will move up
as the strength of the signal increases and
down as it decreases.
Increasing your phone's signal may be easy. Try moving
your phone slightly, or move towards a window if you're
calling from inside a building.
Making a call
Your cellular phone does not have a dial tone. Simply
enter the phone number (including area code, as needed)
and press
. Hold the phone as you would any other
telephone, with the antenna pointed up and over your
shoulder.
Editing a number on display
If you make a mistake while entering a number to dial,
press
to move the cursor to the left and
to move it
to the right. To delete the character to the left of the
cursor, press Clear. To delete all characters, press and hold
Clear.
Dialing a phone number stored in the phone book
View stored names and numbers by pressing
or
from the start screen (
, then press
see page 8)
Calling card calls
Note: See "Calling card" on page 29.
15
Advertisement
Table of Contents
