If you select $XWRPDWLF, your phone's lights are turned off
within fifteen seconds if no keys are pressed. If 2Q is
selected, then the lights will remain on the entire time
your phone is connected to the car kit.
Listen to voice messages
This feature allows you to access your voice messages.
See "Voice messages" on page 70 for complete details.
Lock code
You'll need the lock code to activate and deactivate
Phone Lock (see page 54), or to change your lock
code. The default lock code is 1234. If you enter an
incorrect lock code five times in a row,
phone will
your
prompt you for the security code (see page 61).
Changing your lock code
In a lock code, only numeric characters are accepted.
1. Enter 0HQX 4 3 2 3 (6HWWLQJV - 6HFXULW\#VHWWLQJV -
$FFHVV#FRGHV - &KDQJH#ORFN#FRGH)
2. Enter lock code at (QWHU#ORFN#FRGH=#and press 2.
3. Enter new lock code, press 2.
4. Verify new lock code, press 2.
Note: When you change your lock code, make sure you store it
in a safe place, away from your phone. Avoid entering access
codes similar to emergency numbers to prevent accidental
emergency calls.
Manual touch tones
This setting determines how long touch tones are pro-
duced as you press the keys on the keypad. Note that
touch tones are sometimes called DTMF tones.
See "Touch tones" on page 67 for details.
45