Upgrade Device Firmware; Backup & Restore Settings - ROHS FI8918 User Manual

WWW.FOSCAM.COM

3.15 Upgrade Device Firmware

When you upgrade the camera, please upgrade system firmware first and then upgrade Web UI.
NOTE: After you upgrade the system firmware, you will not view the camera in browser before
you upgrade Web UI. Make sure IP camera tool on your computer could find your camera's IP
before you choose upgrade in browser.
For Web UI only can be upgraded by IP camera tool after upgrade system firmware.
Click Browse, choose the correct bin file and then click Submit to upgrade.
Don't shut down the power during upgrade until the IP camera tool finds the camera again.
3.16 Backup & Restore Settings
If you don't want to set all parameters that you've set already. You can click Submit and all the
parameters you set will be store as a parameters bin file next time. And then ,you could get all
parameters which you set before when you login it again
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 3.31
Figure 3.32
Figure 3.33
FI8918/FI8918W User Manual
36