Alarm Service Settings - ROHS FI8918 User Manual

WWW.FOSCAM.COM
If it prompts error information as follows.
1) Can not connect to the server. Please check FTP Server is correct or not.
2) Network Error. Please try later.
3) Server Error.
4) Incorrect user or password. Please check the username and password is correct or not.
5) Can not access the folder. Please be sure the folder exists and your account is authorized
6) Error in PASV mode. Please be sure the server support PASV mode
7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT
8) Can not upload file. Please be sure your account is authorized
Please check if parameters you filled in are correct or not. The format of image is like
00606E8C1930(sarah)_0_20100728114350_25.jpg
Please check if your FTP server supports this format of file name

3.13 Alarm Service Settings

If you enable Motion Detect Armed. It will send mail alerts and upload images when motion
trigger.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 3.24
Choose it
If the number is bigger and the
sensibility is higher
There will not be so much false alarm when
light changes
Figure 3.25
FI8918/FI8918W User Manual
33