Mail Service Settings - ROHS FI8918 User Manual

WWW.FOSCAM.COM

3.10 Mail Service Settings

If you want the camera send emails when motion trigger. You need set Mail Service Settings.
Please set these settings as the following picture. (Figure 3.18)
Make sure your mailbox for sender support SMTP. Here you can fill in four receivers to receive
images. SMTP port usually is 25, some SMTP server have its own port, such as 587 or 465.And
Transport Layer Security usually is None. But if you use Gmail, Transport Layer Security must be
TLS or STARTTLS. And SMTP Port must be 465 or 25 or 587, which port you choose should be
decided by which Transport Layer Security you choose.
NOTE: Please click Submit first before choose Test.
You will see the test result after click Test.
If it prompts these following errors when you click Test. Please check whether the information
you filled in are incorrect. Make sure all of them are correct and try it again.
1) Can not connect to the server
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 3.18
Figure 3.19
FI8918/FI8918W User Manual
29