Turn The Radio On And Off; Tune And Save A Radio Channel - Nokia 6155 User Manual

9243644_6155_en_au.fm Page 45 Wednesday, December 28, 2005 11:28 AM
Options
With the radio on, select
one of the following:
Switch off—Turn off the radio.
Save channel—Save the current station
to one of 20 locations (only available
with a new station entered).
Channels—Scroll up or down to select
a channel from 20 locations. WIth an
existing channel highlighted, select
Options > Delete channel
to delete or rename the saved channel.
Mono output or Stereo output—Listen
to the radio in monaural mode
(default) or in stereo. Stereo output is
available through a stereo
enhancement.
Loudspeaker or Headset—Listen to the
radio through the speakerphone or
through the headset.
Set frequency—Manually enter the
frequency of a known radio station.
To set the radio frequency, press * and
use the keypad to enter the frequency
of a known radio station.
To adjust the radio volume, press the
volume up and down keys.
When an application using a browser
connection is sending or receiving
data, it may interfere with the radio.
When you place or receive a call, the
radio automatically mutes. When the
call ends, the radio switches back on.

Tune and save a radio channel

Options and You can save a preset station to any
one of 20 locations in memory.
1. When the radio is on, select
to change the radio frequency
in 0.1 MHz steps, or select and hold
or to start the channel
search. Searching stops when a
channel is found.
2. To save the channel, select
Options > Save
or Rename
To save the channel to a memory
location 1 to 9, press and hold the
corresponding number key while
the radio is playing. To save the
channel in the memory location
from 10 to 20, press briefly 1 or 2
and the desired number key 0 to 9.
3. Enter a name for the channel, and
select OK.
4. Select an (empty)
the channel.
■ Recorder
This feature enables you to record
pieces of speech or sound with your
device and listen to them later. The
total available time is 3 minutes with
no memos stored. The maximum
length of a recording depends on how
much memory remains available.
In standby mode, select
Media > Recorder
the recording or
M e d i a
or
channel.
location to save
Menu >
> Record to start
Recordings list to
45