Time And Date Settings; Clock; Date; Date And Time Auto-Update - Nokia 6155 User Manual

9243644_6155_en_au.fm Page 52 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
■ Time and date
settings

Clock

In standby mode, select Menu
Settings > Time and date
Show clock or Hide clock,
Time zone or Time format.

Date

In standby mode, select Menu
Settings > Time and date
Show date or Hide date, Set the
Date format, or Date separator.

Date and time auto-update

Auto-update is a network service.
See "Network services", p. viii. If your
network operator supports this feature,
you can allow the digital network to
set the clock, which is useful when you
are out of your home area, for instance
when you have traveled to another
network or time zone.
In standby mode, select Menu
Settings > Time and date
update of date & time > On,
first, or Off.
If you use the Auto-update of date &
time option while outside your digital
network, you may be prompted to
enter the time manually. Network time
will replace the time and date when
you reenter your digital network.
52
If your battery has been removed or
has discharged outside the digital
network, you may be prompted to
enter the time manually (when the
battery is replaced or recharged, and
>
you are still outside of the digital
> Clock >
network).
Set the time,

■ Call settings

Anykey answer

>
Anykey answer enables you to answer
> Date >
an incoming call. Briefly press any key
date,
except the right selection or end key.
In standby mode, select
Settings > Call
On or Off.

Automatic redial

Occasionally, your network may
experience heavy traffic, resulting in a
fast busy signal when you dial.
With automatic redial activated, your
device redials the number (number of
times is specified by the network), and
>
notifies you when the network is
> Auto-
available. In standby mode,
Confirm
select Menu > Settings
Automatic redial

Speed dials

You can activate or deactivate speed
dials. In standby mode, select
Settings > Call
Off. See "Set up speed dials", p. 34.
Menu >
> Anykey answer >
> Call >
> On or Off.
Menu >
> Speed dials > On or