Using The Touch Screen; Adjusting The Touch Panel - JVC GZ-E307 User Manual

Using the Touch Screen

Icon operation buttons, thumbnails, and menu items are displayed on the
touch screen according to the mode in use.
There are two ways to operate the touch screen, namely "tap" and "drag".
0
The following are some examples.
*The following is a screen of the model with Wi-Fi functions.
A Tap the displayed button (icon) or thumbnail (file) on the touch screen
to make selection.
B Drag the thumbnails on the touch screen to search for the desired file.
Memo :
The touch screen of this unit is pressure-sensitive. When the touch screen
0
does not respond smoothly, apply slightly more force to your fingertip.
Tap the buttons (icons) on the touch screen accurately. The buttons may
0
not respond if they are not tapped on the right area.
Do not press or rub with excessive force.
0
Do not operate the touch screen using an object with a sharp tip.
0
Pressing two or more places at a time may cause a malfunction.
0
Perform "TOUCH SCREEN ADJUST" if the reactive area of the screen is
0
misaligned with the touched area. (Adjust by lightly tapping with a corner
of an SD card, etc. Do not press with an object with a sharp tip or do not
press hard.)
"Adjusting the Touch Panel" (A p. 17)

Adjusting the Touch Panel

Adjusts the response position of the buttons on the touch screen.
*The following is a screen of the model with Wi-Fi functions.
1
Tap "MENU".
2
Tap "SETUP".
3
Tap "TOUCH SCREEN ADJUST".
The touch screen adjustment screen appears.
0
4
Tap "+". (3 times in total)
Keep tapping "+" as its position changes with every tap.
0
If areas other than the "+" mark are tapped, errors will occur. Make
0
sure to tap the "+" mark.
5
Tap "+" again to confirm the adjusted positions. (3 times in total)
Keep tapping "+" as its position changes with every tap.
0
6
Tap "OK".
Getting Started
17