JVC GZ-E307 User Manual page 116

Using Wi-Fi (GZ-EX315)
Operation Method
Connect the camera to the access point (wireless LAN router)
Connect the camera to the access point by either of the following methods.
Wi-Fi Protected Setup (WPS) Registration
o
Follow the operations below if the access point (wireless LAN router) in use
supports WPS.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
4
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
5
Tap "ACCESS POINTS".
(Operation on this camera)
116
6
Tap "ADD".
(Operation on this camera)
7
Tap "EZ REGISTRATION WPS".
(Operation on this camera)
8
Activate WPS of the access point (wireless LAN router) within 2 minutes.
To activate WPS, refer to the instruction manual of the device in use.
0
9
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
Search the access point, and select from the list.
o
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)