JVC GZ-E307 User Manual page 66

Playback
Switching to the video playback screen
o
1
Open the LCD monitor.
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
0
the mode switching screen.
Tap A to switch the mode to video. (You can also use the A/B button
on this unit.)
2
Tap "<<PLAY" to select the playback mode.
3
The video playback screen is displayed.
Caution :
Make a backup of important recorded data.
0
It is recommended to copy your important recorded data to a DVD or other
recording media for storage.
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.
Disclaimer
0
- We shall not be held responsible for loss of recorded contents when
recording videos/audio or playback cannot be operated due to
malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to
malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data.
- In order for quality improvement, defective recording medium is subject
to be analyzed. Therefore, it may not be returned.
66
Checking the Recording Date and Other Information
You can display the recording date and duration of the selected file.
1
Pause the playback and press the INFO button.
To return to the playback screen, press the INFO button or tap L.
0