Answer Or Reject A Call - Nokia 6131 User Manual

If an application is sending or receiving data using a packet data connection, end the application before you
use voice dialing.
Voice commands are language-dependent. To set the language, see
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely
solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or press and hold the volume down key. A short
tone is played, and
If you are using a compatible headset with the headset key, press and hold the headset key to start the voice
dialing.
2. Say the voice command clearly. If the voice recognition was successful, a list with matches is shown. The
phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials
the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is similar to voice dialing. See
commands in My shortcuts

■ Answer or reject a call

To answer an incoming call, press the call key, or open the phone. To end the call, press the end key or close the
phone.
To reject an incoming call if the phone is open, press the end key. To reject an incoming call when the phone is
closed, press and hold a volume key.
To mute the ringing tone, press a volume key when the phone is closed, or select
open.
Tip: If the Divert if busy
rejecting an incoming call also diverts the call. See
Speak now is displayed.
p. 65.
function is activated to divert the calls (for example, to your voice mailbox),
Copyright © 2006 Nokia. All rights reserved.
Voice playback language
Call p. 72.
in Phone p. 74.
Voice
Silence when the phone is
29