Data Transfer - Nokia 6131 User Manual

To define how to use the service, select
connection and from the following options:
When needed — to set the packet data connection to established when an application needs it. The connection
will be closed when the application is terminated.
Always online — to set the phone to automatically connect to a packet data network when you switch the
phone on. or indicates that the GPRS or EGPRS service is available. If you receive a call or a text message
or make a call during a packet data connection,
suspended (on hold).
Modem settings
You can connect the phone using Bluetooth wireless technology or USB data cable connection to a compatible
PC and use the phone as a modem to enable EGPRS connectivity from the PC.
To define the settings for EGPRS connections from your PC, select
data > Packet data settings
active access point > Alias for access
Select Packet data access
network, and select OK.
You can also set the EGPRS dial-up service settings (access point name) on your PC using the Nokia Modem
Options software. See
the PC settings are used.

Data transfer

Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile
phone), a compatible PC, or a remote Internet server (network service).
Your phone allows data transfer with a compatible PC or another compatible device when using the phone
without a SIM card. Note that when you use the phone without a SIM card, some functions appear dimmed in
the menus and cannot be used. Synchronizing with a remote Internet server is not possible without a SIM card.
Menu
> Active access point, and activate the access point you want to use. Select
point, enter a name to change the access point settings, and select OK.
point, enter the access point name (APN) to establish a connection to an EGPRS
Nokia PC Suite p. 114. If you have set the settings both on your PC and on your phone,
Copyright © 2006 Nokia. All rights reserved.
> Settings > Connectivity
or indicates that the GPRS or EGPRS connection is
Menu
> Packet data > Packet data
> Settings > Connectivity > Packet
Edit
70