Sharp LC-26D4U Service Manual page 30

LC-26D4U
LC-32D4U
LC-37D4U
(4) White balance adjustment sequence
Adjustment is available in any input or position. There is no specific order to adjust high and low, either.
* Low-side adjustment start →
Repeat until values are
properly adjusted.
Completion of low-side adjustment
* High-side adjustment start →
Repeat until values are
properly adjusted.
Completion of high-side adjustment
PC
Activate process command (STEP 1).
KRSW0001
Activate process command (STEP 2).
KKT10037
Set two-point adjustment.
MSET0000
Initialize adjustment values.
MSET0004
Set low-side adjustment point.
SDML0057
Adjust R and B.
MGLRx x x x , MGLBx x x x
Set high-side adjustment point.
SDMH0204
Adjust R, G, and B.
MGHRx x x x , MGHGx x x x , MGHBx x x x
Save adjustment values.
MSET0003
Completion of adjustment
Turn off AC power
Command is accepted.
ERR
Process command is activated.
OK
Two-point adjustment is set.
OK
Initialization is done.
OK
Initialization of adjustment values for
adjustment pattern display
Low-side adjustment point is set.
OK
Setting adjustment values
Reflecting specified values
Adjustment values are set.
OK
Initialization of adjustment values for
adjustment pattern display
High-side adjustment point is set.
OK
Setting adjustment values
Reflecting specified values
Adjustment values are set.
OK
Storing adjustment values
Adjustment values are saved.
OK
30
Set