Table of Contents
Advertisement
Problem
The compressor comes
on less and less often
and for shorter periods
of time. The tempera‐
ture in the appliance
rises.
An LED indicator light is
flashing at the back of
the appliance at the
bottom near the com‐
pressor (depending on
model).
Cause and remedy
This is not a fault. The set temperature is too high.
Adjust the temperature.
Check the temperature again after 24 hours.
The food begins to defrost.
The room temperature is lower than the ambient tem‐
perature for which the appliance is designed.
Operating in a room which is too cold will cause the
compressor to switch off for too long, causing the
freezer to become too warm.
See "Installation - Location".
Increase the temperature of the room.
This is not a fault. The electronic unit for the com‐
pressor is equipped with an operation and fault diag‐
nosis LED indicator light which flashes every 15 sec‐
onds (depending on model).
Problem solving guide
39
Hide quick links:
Advertisement
Table of Contents
