Assembly Instruction - Advantage 16116488-1 Owner's Manual

This manual is designed to help you easily assemble, adjust and use this machine. Please
read this manual carefully. For the sake of familiarizing yourself with the parts identified in the
instruction, first study the overview drawing. Set all parts in a clear area on the floor and remove
the packing material. Refer to the parts list for help to identify the parts. It will take two people to
assemble your unit.
Should you have any questions regarding your cycle, please contact our customer
service department at 1-888-707-1880.
STEP 1
1. Attach the front stabilizer (15) with end caps (17) to the front of main frame (1). Secure using two
carriage bolts M8×60 (16), two spring washers (18), two curved washers (20) and two cap nuts (19).
2. Attach the rear stabilizer (35) with leveling end caps (36) to the main frame (1). Secure using two
carriage bolts M8×60 (16), two spring washers (18), two curved washers (20) and two cap nuts (19).
NOTE: Make sure you fasten the bolts securely to avoid shaking and discomfort when
cycling.
If the unit is wobbly, turn the leveling end caps on the rear stabilizer to adjust the unit
STEP 2
1. Remove three of nylon nuts (14) and washers (13) from the seat (12).
2. Attach the seat (12) to the top of seat post (2). Secure using three washers (13) and three nylon nuts
(14).
3. Slide the bellow (53) onto the seat post (2).Insert the seat post (2) into the main frame (1). Secure
using the seat post adjustment knob (30).
NOTE:
You will find the seat post has 7 holes. Adjust the seat post to your desired height.
Customer Service 1-888-707-1880
Or email us at customerservice@dyaco.ca

ASSEMBLY INSTRUCTION

5
13
14
2
Dyaco Canada Inc. © 2013