Advertisement
How to use
Lock-off switch button
There is a lock-off switch button on the
handle. To start the tool, first depress the
lock-off switch button and then pull the trig-
ger Release the trigger to stop The trigger
will not work before the lock-off switch but-
ton is depressed
Top guide
The shorter slot (as seen from right) is for
bevel cuts of
45
degrees. Align it with your
cutting line.
-...
Cutting depth
To adjust the cutting depth, loosen the
thumb screw on the depth guide; then,
holding down the base with one hand, raise
or lower the body for the desired depth.
ck-off saitch butt in
F i g . 4
I
Fig. 5
Fig. 6
7
Advertisement
