Advertisement
11. When operating the saw, keep the
cord away from the cutting area and
position
it so
that
it
will
n o t be
caught on the workpiece during the
cutting operation.
Operate with proper hand support,
proper work support, and supply
cord routing away from the work
area.
A TYPICAL ILLUSTRATION
OF
PROPER SUPPORT, AND SUPPLY
CORD
ROUTING.
Fig. 2
WARNING:
It
is important t o support the work properly and t o hold the saw firmly t o pre-
vent loss of control which could cause personal injury. Fig. 2 illustrates typical
hand support of the saw.
12.
Never attempt t o saw
with
the cir-
cular saw held upside d o w n i n a
vise. This can lead t o serious acci-
dents, because
it
is extremely dan-
gerous.
13. Before setting the tool down after completing a cut, be sure that the lower (tele
SAVE THESE INSTRUCTIONS.
scoping) guard has closed and the blade has come t o a complete stop.
Advertisement
