Nokia 5700 XpressMusic User Manual page 74

Network operator time
date, and time zone information to your phone. If you select Auto-update, all
active connections are disconnected. Check any alarms as these may be affected.
Enhancement
To change settings of an enhancement, in the
enhancement, such as Headset, select
options:
Default profile—to select the profile you want to activate each time you connect
the enhancement to your phone
Automatic answer—to set the phone to answer an incoming call automatically
after 5 seconds when this enhancement is connected to your phone. If the
type is set to Beep once
answer the phone manually.
Lights—To set the phone lights continuously on while using the enhancement,
select On.
Security
Select Phone and SIM
Phone and SIM card
You can change the following codes: lock code, (U)PIN code, and PIN2 code. These
codes can only include the numbers from 0 to 9.
Avoid using access codes similar to emergency numbers to prevent accidental
dialing of the emergency number.
Code in use—to select the active code,
shown only if the active USIM supports UPIN, and the UPIN is not rejected.
PIN code request
time the phone is switched on. Some SIM cards may not allow the PIN code
request to be turned Off. If you select
shown instead.
PIN code or UPIN
Keypad autolock period
defined period of inactivity
Phone autolock period—to set a time-out after which the phone is automatically
locked. To use the phone again, you need to enter the correct lock code. To turn off
the autolock period, select None.
74
(network service) — to allow the network to update time,
or Silent, automatic answer cannot be used, and you must
card, Certificate
or UPIN code request—to set the phone to request the code each
code, PIN2 code, and
> User defined—to automatically lock the keypad after a
Enhancement sett.
Options > Open
management, or
PIN or UPIN, for the active USIM. This is
Code in use > UPIN,
Lock code—to change the codes
view, scroll to an
and from the following
Security module.
UPIN code request
Ringing
is