Video Sharing - Nokia 5700 XpressMusic User Manual

shown to the caller. If you select No, or do nothing, video sending is not activated,
and a grey screen is shown in place of the video.
Even if you have denied video sending during a video call, the call is still charged
as a video call. Check the pricing with your service provider.
To end the video call, press the end key.

■ Video sharing

Use Video sharing
compatible mobile device during a voice call.
Video sharing requirements
Because Video sharing
(UMTS) connection, your ability to use
availability. Contact your service provider for questions about network availability
and fees associated with this application. To use
following:
• Ensure that your device is set up for person-to-person connections.
• Ensure you have an active UMTS connection and are within UMTS network
coverage. If you start the sharing session while you are within UMTS network
coverage and a handover to GSM occurs, the sharing session is discontinued,
but your voice call continues.
• Ensure that both the sender and recipient are registered to the UMTS network.
If you invite someone to a sharing session and that person's phone is turned
off, or the person is not within UMTS network coverage, they do not know that
you are sending an invitation. However, you receive an error message that the
recipient cannot accept the invitation.
Settings
A person-to-person connection is also known as a session initiation protocol (SIP)
connection. The SIP profile settings must be configured in your device before you
can use Video sharing.
Ask your service provider for the SIP profile settings, and save them in your device.
Your service provider may send you the settings over the air.
If you know a recipient's SIP address, you can enter it on your contact card for that
person. Select Menu
26
to send live video from your mobile device to another
requires a 3G universal mobile telecommunications system
> Contacts, a contact, and
Video sharing depends on 3G network
Video sharing
Options
you must do the
> Edit > Options > Add