Getting Started - Sharp S3455UKE Owner's Manual

Getting Started

When assembling your steam mop there may be a little
water in or around the water tank. This is because we test
all our steam mops 100% before you buy them, so you get
a quality Shark ® Professional SLIM Steam Pocket
c
a
d
e
h
f
i
g
a Steam Mop Body
b
Mop Handle
c
Triangle Mop Head
(1025SO)
d
Cleaning Pocket for the Triangle Mop Head
(P140W)
e
All-Purpose Mop Head
(1024SOY)
f Cleaning Pocket for the All-Purpose Mop Head
(P129W)
g Carpet Glider
(XCG200)
h
Water Flask
(1039SO)
i
(1) 6mm x 52mm Large Screw*
* Phillips or flat head screwdriver can be used.
Screwdriver not included.
2 Freephone: 0800 862 0453
j
® Mop.
k
b
l m
j Quick Release Swivel Cord Wrap
k
Cord Clip
l
Water Tank
m
Steam Control Button
n
Mop Head Release Button
n
IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use.
Never fill the mop, attach the mop head, change
or remove the cleaning pocket when the mop is
plugged into the wall. To prolong the life of your
Shark Professional SLIM Steam Pocket
®
we recommend using distilled water. Make sure you
only add water to the tank. Chemicals or cleaning
solution may damage the appliance and could be
unsafe for you and your family.
fig. 1
ASSEMBLE
1
Insert the Mop handle end labeled "Front" into
the steam mop body. Make sure it is inserted past
the line printed on the pole. Secure the assembled
handle and pole by using the large screw and a
Mop,
®
Phillips or a flat head screwdriver (screwdriver not
included). (fig. 1)
www.sharkclean.eu/uk 3