TP-Link TL-WR841HP Quick Installation Manual

Quick Installation Guide
300Mbps High Power Wireless N Router
TL - WR841HP
7106505420 REV2.0.0

Connect the Hardware

If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router's INTERNET port, then follow steps 4 and 5 to
complete the hardware connection.
1
Install the antennas to the router
and then use the supplied
bracket to fix the position of the
antennas in place for best Wi-Fi
performance.
Internet
2
Modem
3
4
5
Verify that the hardware
connection is correct by checking
these LEDs.
Power System WLAN
On Flashing Flashing On/Flashing
Power adapter
Turn off the modem and remove
the backup battery if it has one.
Connect an Ethernet cable from the
modem to the INTERNET port on your
router.
Turn on the modem and then wait
about 2 minutes for it to restart.
WAN