Shark S3502UKJWA Owner's Manual page 9

1
IMPORTANT: First things first, always make sure
the mop is UNPLUGGED from the wall when not
in use. Never fill the mop, attach the mop head,
change or remove the micro-fibre pocket when
the mop is plugged into the wall. If you have hard
water you might want to use distilled water to
prolong the life of the Shark
Mop. Make sure you only add water to the tank.
Chemicals or cleaning solution may damage the
appliance and could be unsafe for you and your
family.
Steam Pocket
® ®
2
ASSEMBLE
1
Insert the mop handle into the pump actuator (the
tube that leads to the tank). Push the mop handle
and pump actuator together in until you hear it
click into place.
2
Select a cleaning pad. Fit one side of the pocket
onto the head first, then using the lavender loop,
pull the pocket over the head. Attach the quick
fasteners on the top of the pocket to secure in
place.
www.sharkclean.co.uk
3