Baumatic BTT970SS Instruction Manual
  1. Manuals
  2. Brands
  3. Baumatic Manuals
  4. Ventilation Hood
  5. BTT970SS
  6. Instruction manual
Baumatic BTT970SS Instruction Manual

Baumatic BTT970SS Instruction Manual

90 cm telescopic cooker hood
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BTT970SS
Cooker Hood
my

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BTT970SS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Baumatic BTT970SS

Summary of Contents for Baumatic BTT970SS

  • Page 1 BTT970SS Cooker Hood...
  • Page 2 User Manual for your Baumatic BTT970SS 90 cm Telescopic cooker hood NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...

  • Page 3: Table Of Contents

    Contents Page Environmental note IMPORTANT SAFETY INFORMATION 5 – 7 Specifications of your cooker hood Using your Baumatic cooker hood 9 – 11 Setting the time of day Switching the cooker hood on and setting the fan speed 10 - 11...

  • Page 4: Environmental Note

    ENVIRONMENTAL NOTE Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person.

  • Page 5: Important Safety Information

    IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line.
  • Page 6 o The edges of the cooker hood are sharp – be mindful of this as you handle your appliance, especially during installation and cleaning. DO NOT CLEAN IN BEHIND THE GREASE FILTERS! o If the room where the cooker hood is to be used contains a fuel burning appliance such as a central heating boiler then its flue must be of the sealed or balanced flue type.
  • Page 7 o Remember that your cooker hood is removing air from your room. Ensure that proper ventilation measures are being observed. o Note: Your cooker hood is designed to remove cooking odours from the room and not steam. o Warning - Always ensure that the cooker hood been disconnected...

  • Page 8: Specifications Of Your Cooker Hood

    Specifications of your cooker hood Congratulations on purchasing a Baumatic cooker hood PRODUCT DIMENSIONS Height: 575 - 1055 mm * Width: 900 mm Depth: 330 - 485 mm DIMENSIONS OF CHIMNEY SECTION: Width: 303 mm Depth: 276 mm Your cooker hood is fitted with:...

  • Page 9: Using Your Baumatic Cooker Hood

    Make sure that it has been installed by a suitably qualified person, information contained Baumatic’s installation instructions. o Find the control panel, which is located in the middle of the canopy. o There are several buttons on the control panel, which perform separate functions.

  • Page 10: Setting The Time Of Day

    YOU SHOULD ALSO RUN YOUR HOOD FOR TEN MINUTES AFTER YOU HAVE FINISHED COOKING. o After switching off the hood, the telescopic part of the hood will return to its original position automatically. Setting the time of day IMPORTANT: After the cooker hood is connected to the power supply, the time of day should be set.

  • Page 11: The Cut Off Timer

    o If you press the speed selection button for a fourth time, then the motor will return to running at low speed. o To switch the cooker hood off, press the ON/OFF button. o When you next switch the hood on, it will remember the speed that it was running at when it was last used.

  • Page 12: Cleaning Your Baumatic Cooker Hood

    Cleaning your Baumatic cooker hood IMPORTANT: BEFORE CLEANING, ALWAYS ENSURE THAT HAVE SWITCHED YOUR COOKER HOOD OMNI-POLAR SWITCH, SET AT THE WALL FROM THE CABLE. Cleaning o Clean the external parts of your cooker hood with mild liquid detergent and a new damp cloth.

  • Page 13: Maintenance

    Maintenance Removing and cleaning the grease filters o Extend the telescopic section of the cooker hood. o Remove grease filters pulling down on the handle and pulling them away from cooker hood. o Soak the grease filters in hot water and washing up liquid for at least 3 minutes.

  • Page 14: Changing A Light Bulb

    o Repeat the process if required. o Refit the grease filters once they have dried. o IMPORTANT: Let the grease filters dry thoroughly before refitting them in the cooker hood. Changing a light bulb IMPORTANT: BEFORE ATTEMPTING TO CHANGE A LIGHT BULB, YOU MUST ENSURE THAT YOU HAVE DISCONNECTED THE COOKER HOOD FROM YOUR MAINS SUPPLY.

  • Page 15: Installation

    o Use a screwdriver to remove the glass cover that sits over the bulb. Unplug the light bulb that needs to be replaced and insert a new G4 20W (max) bulb. Then replace the glass cover. o IMPORTANT: Defective bulbs should be replaced immediately. o If the lights still do not work, make sure that the bulbs are fitted properly into their housings before you call for technical assistance.

  • Page 16: Before Beginning Installation

    We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations. The wires in the mains lead are coloured in accordance with the following UK code: Blue = Neutral, Brown = Live, Green/Yellow = Ground If you only find two wires in the main’s lead (blue and brown), then neither must be connected to the earth terminal.

  • Page 17: Installing Your Cooker Hood

    Please note that the styles of cooker hood shown in the line drawings in the following pages are sometimes different to the shape of the BTT970SS. However the installation method shown is correct and MUST be followed.
  • Page 18 2) Position the hood against the wall that you are intending to install it on and mark the position of the screw holes that are to be drilled. 2a) The support screw holes are indicated by figure A in this drawing and the anchoring screw holes are indicated by figure B.
  • Page 19 4) Insert rawl plugs into all of the holes that you have drilled. 5) Fasten the support screws halfway in, leaving them 10 mm out of the wall. 6) Hang the hood onto the support screws. 7) Fully tighten the support screws (A) and then screw the anchoring screws (B) through the relevant holes in the cooker hood.

  • Page 20: Fitting The Chimney

    8) Connect the coupling to the top of the cooker hood, and then connect a 125 mm ducting hose to the coupling (please note that the ducting hose is not supplied with the appliance). o The other end of the ducting hose should be connected to a discharge outlet that is suitable for cooking vapours.
  • Page 21 10) Lift chimney section (D) upwards until it reaches the ceiling. You must ensure that it is perpendicular to the hood. o Mark the side measurements of both sides of chimney section (D) on the wall with a pencil and then remove chimney section (D).
  • Page 22 12) Using an 8 mm drill bit, drill out two holes on the pencil markings that you made in step 11. Insert rawl plugs into the holes and then use a screwdriver to secure the fixing bracket to the wall. o Refit chimney section (C) to the hood and fix it onto the hood using the two screws that are supplied.

  • Page 23: Completing The Installation

    Completing the installation o The electrical connection must correspond to the electrical requirement noted on the rating plate, which is placed inside the cooker hood. The appliance should now be connected to the electrical supply. See page 15 - 16 for detailed information on the electrical connection.

  • Page 24: Troubleshooting

    Troubleshooting IMPORTANT: If your cooker hood appears not to be operating properly, before contacting Baumatic Customer Care Department, please refer to the checklist below. My cooker hood will not start. o Check that the hood is connected to the electricity supply o Check that the fan speed control is set correctly.
  • Page 25 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance.

  • Page 26: Contact Details

    United Kingdom zech Republic Baumatic Ltd., Baumatic CR spol s.r.o. Baumatic Buildings, Průmyslová zóna Sever 6 6 Bennet Road, 460 11 Liberec 11 Reading, Berkshire Czech Republic RG2 0QX United Kingdom 420 483 577 200 Sales Telephone ww.baumatic.cz (0118) 933 6900...

Table of Contents