Trouble Shooting - Hotpoint AQUALTIS AQ7L49I Instructions For Installation And Use Manual

Trouble shooting

see “Assistance”
Problem:
The washing machine does not
switch on.
The wash cycle does not start.
The machine does not fill with
water or Idicator light for the first
wash cycle flashing rapidly.
The machine continuously fills
with water and continually drains
away or Water left in the drum or
Stuck on wash.
The machine does not drain or
spin - (error lights flashing).
The machine does not spin.
The machine does not drain or
spin - 'EASY IRON' light flashes.
The programme takes too long.
The machine vibrates a lot during
the spin cycle.
The machine is noisy.
Possible causes / Solutions:
New Installation
see “Wash cycles and options”
- (Most Common Cause!)
.
(see "Installation").
see “Installation”).
(“Wash cycles and options”).
(see 'The machine wont spin properly' below)
EN
13