Service Parts; Choosing An Installation Site; Indoor Unit; Wireless Remote Controller - Daikin FTXG25JV1BW Installation Manual

Accessories
– ,

Indoor unit

A J
Mounting plate
A
Titanium apatite photocatalytic
B
air-purifying filter
C Wireless remote
controller

Service Parts

• Obtain service parts as necessary.
• If a service part is required, obtain and install the part indicated by the part number corresponding to the unit's model name.
Side cover for right-side piping
K
Model name Part name Model name
FTXG25JV1BW FTXG25JV1BA
FTXG35JV1BW FTXG35JV1BA
5003651
FTXG50JV1BW FTXG50JV1BA
CAUTION
• Side cover for right-side piping is labeled with information concerning applicable safety standards. When replacing the
K
right-side cover with
K

Choosing an Installation Site

• Before choosing the installation site, obtain user approval.
1.
Indoor unit
• The indoor unit should be sited in a place where:
1) the restrictions on installation specified in the indoor unit installation drawings are met,
2) both air inlet and air outlet have clear paths met,
3) the unit is not in the path of direct sunlight,
4) the unit is away from the source of heat or steam,
5) there is no source of machine oil vapour (this may shorten indoor unit life),
6) cool (warm) air is circulated throughout the room,
7) the unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type) as they may shorten the
remote controller range,
8) the unit is at least 1m away from any television or radio set (unit may cause interference with the picture or sound),
9) install at the recommended height (1.8m),
10) no laundry equipment is located.
2.

Wireless remote controller

• Turn on all the fluorescent lamps in the room, if any, and find the site where remote controller signals are properly received
by the indoor unit (within 6m).
IEnglish
Remote
D
controller holder
1
Dry battery AAA. LR03
E
(alkaline)
2
F Indoor unit fixing screw
(M4 × 12L)
1
Part name
5003653
side cover for right-side piping, install the cover securely without removing this labeling.
Operation
G
1
manual
Installation
H
manual
2
Paper pattern
J
(The paper pattern is placed
between the last page and the inner
side of the back cover. See page 10
for the usage of the paper pattern.)
2
Left-bottom
Side cover for left-side piping
L
Model name Part name Model name
FTXG25JV1BW FTXG25JV1BA
FTXG35JV1BW FTXG35JV1BA
5003652
FTXG50JV1BW FTXG50JV1BA
1
1
Right-bottom
Part name
5003654
2