HP 2011x User Manual page 25

Icon
Downloaded from ManualMonitor.com Manuals
Main Menu Options Sub-menu Options
Image Control
Auto-Adjustment
Clock
Clock Phase
Horizontal Position
Vertical Position
Custom Scaling
Sharpness
OverDrive (select models)
Dynamic Contrast Ratio
OSD Control
Horizontal OSD Position
Description
Adjusts the screen image.
Automatically adjust the screen image.
NOTE: This item can only be used with
a VGA input signal.
Minimizes any vertical bars or strips
visible on the screen background.
Adjusting the Clock also changes the
horizontal screen image (VGA input
only).
Adjusts the focus of the display. This
adjustment allows you to remove
horizontal noise, and clear or sharpen
the image of characters (VGA input
only).
Adjusts the position of the screen image
left and right.
Adjusts the position of the screen image
up and down.
Selects the method for formatting
information displayed on the monitor.
Select:
Fill to Screen — image fills the
●
entire screen and might look
distorted or elongated because of
non-proportional scaling of height
and width.
Fill to Aspect Ratio — image is
●
sized to fit the screen and maintains
proportional image.
Adjusts the screen image to look sharper
or softer.
Turns OverDrive on or off. The factory
default is Off.
Sets the DCR setting on or off. The factory
default setting is off. DCR automatically
adjusts the balance between white and
black levels to provide you with an
optimal image.
Adjusts the position of the OSD menu on
the screen.
Changes the viewing position of the OSD
menu to the left or right area of the
screen.
Using the On-Screen Display (OSD)
19