Cleaning The Monitor; Shipping The Monitor - HP 2011x User Manual

Cleaning the Monitor

CAUTION:
Never spray the cleaner directly on the screen surface. It might run behind the bezel and damage the
electronics.
Do not use cleaners that contain any petroleum based materials such as benzene, thinner, or any
volatile substance to clean the monitor screen or cabinet. These chemicals might damage the monitor.
1.
Turn off the monitor and unplug the power cord from the back of the unit.
2. Dust the monitor by wiping the screen and the cabinet using a soft, clean antistatic cloth.
3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.

Shipping the Monitor

Keep the original packing box in a storage area. You might need it later if you move or ship the
monitor.
To prepare the monitor for shipping:
1.
Disconnect the power and video cables from the monitor.
2.
Press the button on the front of the pedestal (1) and lift the monitor panel from the base (2).
Figure 2-1
3.
Set the panel on a soft, protected surface.
4.
Carefully pull the pedestal away from the base to release and separate them.
NOTE:
release the pedestal from the base.
5.
Place the monitor, pedestal, and base in the original packing box.
Downloaded from ManualMonitor.com Manuals
Spray the cleaner on a cloth and use the damp cloth to gently wipe the screen surface.
Removing the Monitor Panel
2511x and 2711x models only: Remove one screw from the bottom of the base to
Maintenance Guidelines
5