Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
Name / Model #1: 20kd 19.5-IN IPS Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
mainboard, power board and key board
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps 19.5" panel
Power cord and VGA cable
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
3
0
0
1
0
10
1
2
0
0
0
0
Page 1
Advertisement
Related Manuals for HP 20kd
Summary of Contents for HP 20kd
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
-
Page 3: Mechanical Instructions
Mechanical Instructions Step Figure Tool Description Unplug the power cord and VGA cable by hand. Press the two side at Remove the same the base time to pull out the Base by hand. - Page 4 Press the quick release button and Remove the hinge pull out the hinge by hand. Use the Screwdriver to remove the screws. Open Remove the latches REAR_CO by Scraper and remove the Keyboard to separate from rear cover by hand.
- Page 5 Tear out all tapes by hand. Remove the screws Separate by hexagonal MAINFRA screwdriver disconnect PANEL connectors to separate the mainframe and panel by hand. Remove the mylar by hand. Remove the screws by screwdriver. Remove MAIN BOARD POWER BOARD Disconn ect the connectors to...
- Page 6 Use the The Power Scraper to Board remove the Capacitance.
- Page 8 Remove the The panel bezel by hand.