TP-Link TL-WPA4220 User Manual page 13

TL-WPA4220 AV600 Powerline Wi-Fi Extender
1． Connect one end of the provided Ethernet (RJ45) cable to the powerline extender's Ethernet port.
2． Connect the other end of the Ethernet (RJ45) cable to your computer's LAN port.
3． Plug the powerline extender into a wall socket.
4． Turn on your computer.
5． Check and confirm that the Power LED and Ethernet LED on the powerline extender are ON.
The hardware connection mechanism is shown below:
As soon as the powerline devices are connected following the steps above, wait until the powerline LED
turns on and a powerline network is available.
6