Panasonic TH-80BF1U Operating Instructions Manual page 27

80-inch model
Main Unit
Touch panel IR transmission part
Installed on the four sides of the liquid crystal panel.
ENTER/
+
VOL
-
MENU
INPUT
Remote control
sensor
Enter / Aspect button
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is displayed:
/
"+" : press to move the cursor up
"–" : press to move the cursor down
/
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen will switch.
INPUT button (INPUT signal selection)
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
•
Power-OFF ... Indicator not illuminated (The unit will still
consume some power as long as the power
cord is still inserted into the wall outlet.)
•
Standby .... Orange
Purple (When "Slot power" is set to "On" and
Terminal Board is installed.
Purple (Depending on the type of the function
board installed, when the power is supplied to
the slot.)
Purple (When "Network control" is set to "On" or
"Wireless network standby" is set to "On". Refer
to "Operating Instructions, Network Operations")
Purple (When "Quick launch" is set to "On".)
•
Power-ON... Blue
•
HDMI1 power management
HDMI2 power management
................. Purple (With HDMI1 or HDMI2 input signal.)
 These functions are not supported by TH-80BF1E, TH-65BF1E, TH-50BF1E.
•
PC power management (DPMS)
................. Purple (With PC input signal.)
•
DVI-D power management
................. Purple (With DVI input signal.)
Notes:
•
If the power indicator is purple, power consumption during standby
is generally larger than that of when the power indicator is orange.
•
Considering COLOR UNIVERSAL DESIGN, purple lights up
brighter than blue.
About COLOR UNIVERSAL DESIGN (CUD)
Brightness Sensor
Detects the brightness in the viewing environment.
USB (VIEWER): Connect to USB memory.
USB (TOUCH): When using the "WhiteBoard
Software" from the supplied CD-ROM,
connect the computer via USB cable.
SLOT: Terminal board (optional accessories) insert
slot (see page 6)
Note:
The upper side slot is for terminal board with 2-slot
width. The terminal board with 1-slot width does not
function when installed in the upper side slot.
Basic Controls
27